Land Rover Workshop Service and Repair Manuals

HEATING AND VENTILATION

REPAIRS

80-11

Motor - footwell air vent

$% 80.20.20

Remove

1. Remove heating control assembly.

 + 

 HEATING AND VENTILATION, 

REPAIRS, Controls - heater (ECU).

2. Disconnect multiplug from motor, remove 

motor from heating assembly.

Refit

1. Fit motor to heating assembly, connect 

multiplug.

2. Fit heating control assembly.

 + 

 HEATING AND VENTILATION, 

REPAIRS, Controls - heater (ECU).

Heater matrix 

$% 80.20.29

Remove

1. Remove HEVAC assembly.

 + 

 HEATING AND VENTILATION, 

REPAIRS, Heater unit/HEVAC - remove for 
access & refit.

2. Invert HEVAC assembly.

3. Remove 2 Torx screws securing LH heating 

duct elbow to HEVAC assembly. Remove 
elbow.

4. Remove 2 Torx screws securing heating pipes 

to matrix, release and remove pipes. Discard 
'O' rings.

CAUTION: Always fit plugs to open 
connections to prevent contamination.