Land Rover Workshop Service and Repair Manuals

HEATING AND VENTILATION

80-4

REPAIRS

Filter - fresh air intake 

$% 80.15.42

Remove

1. Remove 3 screws and remove plenum intake 

cover.

2. Lift flap and remove filter.

Refit

1. Clean plenum intake.
2. Fit new filter.
3. Fit cover and secure with screws.

Plenum - air intake 

$% 80.15.62

Remove

1. Release bonnet support stays, raise and 

secure bonnet in upright position.

2. Disconnect battery earth lead.

3. Remove bonnet sealing rubber from air intake 

moulding.

4. Release cover from positive cable.
5. Remove nut and disconnect positive cable from 

stud.

6. Remove 2 nuts securing plenum and remove 

air intake plenum assembly.

NOTE: Do not carry out further dismantling if 
component is removed for access only.

M80 0512

M80 0513