L322 Range Rover Service Procedures
HEATING AND VENTILATION
REPAIRS
80-9
4. Remove 3 Torx screws securing fan assembly
to heater.
5. Disconnect multiplug and remove fan
assembly.
Refit
1. Position fan assembly to heater and connect
multiplug.
2. Fit and tighten fan assembly Torx screws.
3. Fit and secure fan cover.
4. Fit and secure air blend assembly.
5. Fit HEVAC assembly to fascia.
REPAIRS, Heater unit/HEVAC - remove for
access & refit.
Resistor unit - fan motor - LHD
$% 80.20.17
Remove
1. Disconnect battery earth lead.
2. Remove glove box.
3. Noting fitted position, disconnect 8 multiplugs
from fuse box.
4. Remove 4 Torx screws securing the fuse box,
position the fuse box aside.
M80 0563
M86 5732
M86 5733