L322 Range Rover Service Procedures
TRANSFER BOX
41-4
REPAIRS
15. Disconnect multiplug from high/low shift motor.
16. Disconnect breather hose from gearbox.
CAUTION: Always fit plugs to open
connections to prevent contamination.
17. Support transfer gearbox on jack.
18. Remove 9 Torx bolts and remove transfer
gearbox.
NOTE: Do not carry out further dismantling if
component is removed for access only.
19. Remove 3 Torx screws securing mass damper
and remove damper.
20. Lubricate centre screw LRT-41-018/4 with
Molybdenum Disulphide grease and assemble
tool as shown to remove mounting from
transfer gearbox.
CAUTION: Ensure tool alignment indicator
is at the 6 o'clock position. The tool
alignment indicator is a machined flat on
LRT-41-018/1 and LRT-41-018/2.
Refit
1. Clean mounting and mating faces.
2. Lubricate new mounting and bore in transfer
gearbox casing to aid assembly.
M41 7829
M12 7539A
LRT-41-018/2
LRT-41-018/1
LRT-41-018/4