LR3/Disco 3
CAUTION: Make sure that the wiring harness and the air suspension pipes are not trapped
behind the air suspension compressor bracket.
CAUTION: Make sure the air suspension compressor upper cover is correctly positioned.
NOTE:
Install the upper retaining bolt first.
Install the air suspension compressor.
Tighten the bolts to 10 Nm (7 lb.ft).
Connect the air lines.
Connect the electrical connectors.
2 .
Install the air suspension compressor lower cover.
Install the bolts and tighten to 9 Nm (7 lb.ft).
3 .
Using T4, pressurize the air suspension. For additional information, refer to
Air Suspension System
Depressurize and Pressurize (60.50.38)
(Section 204-05)