Range Rover Classic
SUPPLEMENTARY RESTRAINT SYSTEM
3
REPAIR
ROTARY COUPLER
Service repair no - 19.75.54
CAUTION: Ensure wheels are straight
ahead before removal and refitting. Store
in plastic bag. DO NOT rotate mechanism
whilst removing.
Remove
1. Remove driver’s airbag module.
See Driver’s
Airbag Module
2. Remove steering wheel.
See Steering Wheel
3. Release lever and lower steering column.
4. Release 2 turnbuckles and remove lower dash
panel.
5. Remove 3 screws securing lower half of nacelle
to steering column.
6. Separate the 2 halves of the nacelle and remove
from steering column.
7. Release airbag harness connector from bracket
and disconnect.