Range Rover Classic
WIPERS AND WASHERS
7
REPAIR
TAILGATE GLASS WIPER MOTOR
Service repair no - 84.35.12.
Remove
1. Disconnect battery negative lead.
2. Lower headlining rear section to access wiper
motor assembly.
3. Remove wiper arm and blade.
4. Loosen nut securing wiper motor to body. DO
NOT remove at this stage.
5. Disconnect electrical leads at multi-plug.
6. Remove two bolts securing wiper motor to inner
body.
7. Support wiper motor remove nut loosened at
instruction 4, complete with protective cover,
washer and seal. Simultaneously withdraw wiper
motor.
Refit
8. Reverse removal procedure. Ensuring that
spacer is correctly positioned before fitting
motor.