Engine Overhaul Manual: Flywheel Removal Guide
ENGINE
38
OVERHAUL
9. Fit ring clamp to piston and compress piston
rings.
NOTE: Connecting rods shown in final
fitted positions.
10. Insert connecting rod and piston assembly into
respective cylinder bore ensuring domed
shaped boss on connecting rod faces towards
front of engine on RH bank of cylinders, and
towards rear on LH bank of cylinders.
11. Fit big-end bearing caps and bearing shells.
12. Fit cylinder head(s).
FLYWHEEL AND STARTER RING GEAR
Flywheel - remove
1. Restrain flywheel and remove 6 bolts securing
flywheel.
2. Remove flywheel.
NOTE: Dowel located. On early engines,
balance weights are on engine side of
flywheel, replacement flywheels will have
balance weights on clutch side.