Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Fuel injector removal note (page 2 of 3)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Fuel System
EngineFuel injector removal note · page 2 of 3
  1. Insert a flathead screwdriver between the injector cup and clip finger.
ENGINE – Fuel System – figure
Fig. 38: Inserting Flathead Screwdriver Between Injector Cup & Clip Finger
Courtesy of MAZDA MOTORS CORP.

NOTE: When pushing the clip finger outward, deform the finger until it is removed completely from the cup notch.

  1. Push the clip finger outward using a flathead screwdriver.
  2. Remove the injector with the clip.
  3. Remove the clip from the fuel injector using the following procedure:

NOTE: The clip will not be reused.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.