Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Fuel pump unit inspection [lf] (page 4 of 4)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Fuel System
EngineFuel pump unit inspection [lf] · page 4 of 4
ENGINE – Fuel System – figure
Fig. 25: Identifying F/P Connector Terminal
Courtesy of MAZDA MOTORS CORP.
  1. Turn the ignition switch to the ON position to operate the fuel pump.
  2. Verify that operation sound is heard from the fuel pump.
    • If the operation sound cannot be verified, measure the voltage at fuel pump unit wiring harness-side connector terminal B.
    • If as specified, inspect the following:
    • Fuel pump unit continuity
    • If not within the specification, inspect the following:
    • Fuel pump unit relay
    • Wiring harnesses and connectors between main relay and fuel pump relay
    • Wiring harnesses and connectors between fuel pump relay and PCM
    • Wiring harnesses and connectors between battery and fuel pump relay
    • Wiring harnesses and connectors between fuel pump relay and fuel pump unit

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.