Workshop Manuals Factory service & repair Mini
Mini Mini Workshop Manual (1996-2000)04 · Engine
04 · Engine

Flywheel housing gasket

Make
Mini
Model
Mini Workshop Manual
Year
1996–2000
Section
Repairs › Flywheel housing gasket
EngineFlywheel housing gasket · page 1 of 3

FLYWHEEL HOUSING GASKET

Service repair no - 12.53.04

Remove

  1. Drain engine/gearbox oil. See MAINTENANCEMaintenance.
  2. Remove brake master cylinder. See BRAKES, Repairs.
  3. Remove clutch assembly and release bearing. See CLUTCH, Repairs.
Flywheel housing gasket – Remove clutch assembly and release bearing. See CLUTCH, Repairs.
  1. Loosen unions and disconnect brake pipes from pressure reducing valve.

CAUTION: Plug the connections.

Flywheel housing gasket – Loosen unions and disconnect brake pipes from pressure reducing valve.
  1. Fit protective sleeve 18G 1043 to primary gear splines.
Flywheel housing gasket – Fit protective sleeve 18G 1043 to primary gear splines.
  1. Remove nut and bolt securing steady bar to body.
  2. Release earth strap from body.
  3. Remove bolt securing steady bar to engine and collect washers.
  4. Remove bolt securing engine steady bar bracket to engine and remove bracket.
  5. Remove engine steady bar and earth strap.

Parts & tools for this job For 1996 Mini Mini

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.