Oil pump (page 2 of 5)
- Make
- Mini
- Model
- Mini Workshop Manual
- Year
- 1996–2000
- Section
- Repairs
EngineOil pump · page 2 of 5
- Remove 6 bolts securing cover to flywheel housing.
- Remove flywheel housing cover.
- Remove 2 bolts securing CKP sensor to flywheel housing.
- Remove CKP sensor.
- Remove thrust bearing sleeve from clutch hub.
- Rotate crankshaft and knock back tabs on clutch hub lock washer.
- Rotate crankshaft until clutch hub slots are aligned horizontally.
CAUTION: If crankshaft is not positioned correctly, primary drive ’C’ shaped washer may become displaced and make it impossible to remove flywheel.
- Fit flywheel locking tool and secure with bolts.
Parts & tools for this job For 1996 Mini Mini
- PARTOil filterSearch: Mini Mini 1996 oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Mini Mini engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.