Rear and Side Rail - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Rear and Side Rail - Nissan 240SX 1991-1992 Workshop Manual
Rear and Side Rail
REAR AND SIDE RAIL
18-14 SIDE RAIL ASSEMBLY (contd)
REMOVE SIDE RAIL ASSEMBLY.
8.
Carefully remove complete side rail assembly with center link
from top stack assembly.
DISASSEMBLE
REMOVE WEATHERSTRIP AND RETAINER.
4. Remove two (2) nuts and weatherstrip with retainer from center rail.
REMOVE CENTER LINK ASSEMBLY.
2. Remove E clip and washer from front rail pin. (a) Remove E clip and washer from center rail pin and (b) remove center link from side rail assembly.
ASSEMBLE
INSTALL CENTER LINK ASSEMBLY.
4. Position center link to center rail pin, install washer (a) and E clip. roenon center link to front rail pin, install washer ar (b) clip.
INSTALL CENTER RAIL WEATHERSTRIP AND RETAINER.
2. Secure retainer using two (2) nuts and washers. Do not torque nuts at this time.
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.