Weatherstrips and Retainers - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Weatherstrips and Retainers - Nissan 240SX 1991-1992 Workshop Manual
Weatherstrips and Retainers
WEATHERSTRIPS AND RETAINERS
3-10
FRONT HEADER WEATHERSTRIP (cont'd)
INSTALL FRONT HEADER WEATHERSTRIP TO A-PILLAR.
3. Apply a continuous bead of adhesive (3M P/N 051135- (a) 08008 or equivalent) to A -pillar weatherstrip retainer.
NOTE: Insure weatherstrip adhesive fills void at center of weatherstrip mounting surface.
Lift up weatherstrip lower end and install one retainer (push (b) pin).
Install second, lower weatherstrip retainer (push pin). (c)
Install weatherstrip to A-pillar retainer alternating from top (d) to bottom working toward center using a flat-bladed tool. Repeat step 3 for the other side of vehicle. (e)
INSTALL WINDSHIELD HEADER MOLDING (See 2-5).
4.
FRONT HEADER WEATHERSTRIP RETAINER
REMOVE
REMOVE FRONT HEADER WEATHERSTRIP RETAINER, (see
4. Outer Trim Cap in 1-5). INSTALL
INSTALL FRONT HEADER WEATHERSTRIP RETAINER,
1. (see Outer Trim Cap in 1-6).
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.