Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K806 Engine - K1607 Engine - K16 with VVC08 Engine - L Series09 Emission control10 Engine management system - MEMS11 Engine management system - EDC12 Fuel delivery system13 Cooling system - K Series14 Cooling system - L Series15 Manifold & exhaust systems16 Clutch17 Manual gearbox - R6518 Manual gearbox - PG119 Automatic gearbox - CVT20 Automatic gearbox21 Drive shafts22 Steering23 Front suspension24 Rear suspension25 Brakes26 Restraint systems27 Body28 Heating & ventilation29 Air conditioning30 Wipers & washers31 Electrical32 Instruments
Rover 200 Workshop Manual (1995-1999)27 · Body
27 · Body & interior

Door striker - adjust

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Doors › Door striker - adjust
BodyDoor striker - adjust

DOOR STRIKER - ADJUST

Service repair no - 76.28.05

Adjust

Door striker - adjust – Service repair no - 76.28.05
  1. Loosen 2 TX40 Torx screws securing striker and close door.
  2. Check door for flush fit to adjacent panels and edges for equal gap.
  3. Open door and tighten striker screws to 18 Nm.

TAILGATE STRIKER - ADJUST

Service repair no - 76.28.28

Adjust

Tailgate striker - adjust – Service repair no - 76.28.28
  1. Loosen striker bolts and close tailgate.
  2. Check for equal gap and alignment to adjacent panels.
  3. Open tailgate and tighten striker screws to 9 Nm.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.