Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K806 Engine - K1607 Engine - K16 with VVC08 Engine - L Series09 Emission control10 Engine management system - MEMS11 Engine management system - EDC12 Fuel delivery system13 Cooling system - K Series14 Cooling system - L Series15 Manifold & exhaust systems16 Clutch17 Manual gearbox - R6518 Manual gearbox - PG119 Automatic gearbox - CVT20 Automatic gearbox21 Drive shafts22 Steering23 Front suspension24 Rear suspension25 Brakes26 Restraint systems27 Body28 Heating & ventilation29 Air conditioning30 Wipers & washers31 Electrical32 Instruments
Rover 200 Workshop Manual (1995-1999)27 · Body
27 · Body & interior

Tailgate alignment

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Doors › Tailgate alignment
BodyTailgate alignment

TAILGATE ALIGNMENT

Service repair no - 76.28.25

Adjust

Tailgate alignment – Service repair no - 76.28.25
  1. Check alignment of tailgate against both rear quarter panels.
  2. Open tailgate and mark outline of hinges.
Tailgate alignment – Open tailgate and mark outline of hinges.
  1. Release seal from top of tailgate aperture.
  2. Remove sealant from around tailgate hinges.
  3. Remove 2 trim studs securing rear of headlining to roof.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.