Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K806 Engine - K1607 Engine - K16 with VVC08 Engine - L Series09 Emission control10 Engine management system - MEMS11 Engine management system - EDC12 Fuel delivery system13 Cooling system - K Series14 Cooling system - L Series15 Manifold & exhaust systems16 Clutch17 Manual gearbox - R6518 Manual gearbox - PG119 Automatic gearbox - CVT20 Automatic gearbox21 Drive shafts22 Steering23 Front suspension24 Rear suspension25 Brakes26 Restraint systems27 Body28 Heating & ventilation29 Air conditioning30 Wipers & washers31 Electrical32 Instruments
Rover 200 Workshop Manual (1995-1999)27 · Body
27 · Body & interior

Front door glass

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Doors › Front door glass
BodyFront door glass

FRONT DOOR GLASS

Service repair no - 76.31.01

Remove

  1. Remove front door plastic sheet. See Interior trim components.
  2. Move window glass to gain access to fixing bolts.
Front door glass – Move window glass to gain access to fixing bolts.
  1. Loosen bolts securing glass to regulator.
  2. Release glass from regulator and remove glass from door.

Refit

  1. Position glass to door, align to regulator and tighten bolts to 9 Nm.
  2. Fit front door plastic sheet. See Interior trim components.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.