Workshop Manuals Factory service & repair Rover
Rover 400 Workshop Manual Supplement (1999)04 · Engine - K Series
04 · Engine

Engine and gearbox (page 7 of 10)

Make
Rover
Model
400 Workshop Manual Supplement
Year
1999
Section
Repairs
Engine - K SeriesEngine and gearbox · page 7 of 10
  1. Remove and discard ’O’ ring from fluid outlet hose.
  2. Plug hose and power steering pump connections to prevent excess fluid loss and the ingress of dirt and moisture into the system.
Plug hose and power steering pump connections to prevent excess fluid loss and the ingress
  1. Remove bolts securing engine steady bar to cylinder block and manifold.
Remove bolts securing engine steady bar to cylinder block and manifold.
  1. Remove 3 bolts securing engine rear mounting to engine.
Remove 3 bolts securing engine rear mounting to engine.
  1. Remove through bolt securing engine rear mounting bracket to body.
  2. Remove engine steady bar.
  3. Using tool 18G 1592 release gear selector linkage ball joint from gear selector.
  4. Remove gear selector linkage.
  5. Remove engine rear mounting bracket.

Parts & tools for this job For 1999 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.