Workshop Manuals Factory service & repair Rover
Rover 400 Workshop Manual (1995-2000)26 · Body
26 · Body & interior

Boot lid latch

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Doors › Boot lid latch
BodyBoot lid latch

BOOT LID LATCH

Service repair no - 76.19.11

Remove

Boot lid latch – Service repair no - 76.19.11
  1. Release latch cover from locating tab and remove cover.
  2. Release control rod clip and release rod from latch.
  3. Remove 2 screws securing latch to boot lid.
  4. Release latch from boot lid.
Boot lid latch – Release latch from boot lid.
  1. Disconnect 2 Lucars.
  2. Disconnect release cable from latch and remove latch.

Refit

  1. Position latch to boot lid and connect release cable.
  2. Connect Lucars to latch.
  3. Align latch to boot lid, fit screws and tighten to 9 Nm.
  4. Connect control rod to latch and secure with clip.
  5. Fit latch cover.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.