Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - D Series07 Engine - L Series08 Engine - T Series09 Emission control10 Engine management system - MEMS11 Engine management system - PGMFi12 Engine management system - EDC13 Fuel delivery system14 Cooling system15 Cooling system - L Series16 Manifold & exhaust systems17 Clutch18 Manual gearbox - R6519 Manual gearbox - PG120 Automatic gearbox21 Drive shafts22 Steering23 Suspension24 Brakes25 Restraint systems26 Body27 Heating & ventilation28 Air conditioning29 Wipers & washers30 Electrical31 Instruments
Rover 400 Workshop Manual (1995-2000)26 · Body
26 · Body & interior

Luggage compartment centre casing

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Interior trim components › Luggage compartment centre casing
BodyLuggage compartment centre casing

LUGGAGE COMPARTMENT CENTRE CASING

Service repair no - 76.13.53

Remove

Luggage compartment centre casing – Service repair no - 76.13.53
  1. Raise luggage compartment carpet and board.
Luggage compartment centre casing – Raise luggage compartment carpet and board.
  1. Push down centre pins, remove 6 studs and remove luggage compartment casing.

Refit

  1. Position casing and secure with studs.
  2. Fit luggage compartment board and carpet.

HEADLINING

Service repair no - 76.64.01

NOTE: headlining is identical to headlining with sun roof finisher. See Sunroof.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.