Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - D Series07 Engine - L Series08 Engine - T Series09 Emission control10 Engine management system - MEMS11 Engine management system - PGMFi12 Engine management system - EDC13 Fuel delivery system14 Cooling system15 Cooling system - L Series16 Manifold & exhaust systems17 Clutch18 Manual gearbox - R6519 Manual gearbox - PG120 Automatic gearbox21 Drive shafts22 Steering23 Suspension24 Brakes25 Restraint systems26 Body27 Heating & ventilation28 Air conditioning29 Wipers & washers30 Electrical31 Instruments
Rover 400 Workshop Manual (1995-2000)26 · Body
26 · Body & interior

Fascia panel

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Interior trim components › Fascia panel
BodyFascia panel · page 1 of 3

FASCIA PANEL

Service repair no - 76.46.23/99

Remove

WARNING: Refer to Restraint Systems precaution section. See RESTRAINT SYSTEMS, Precautions.

  1. Disconnect both battery leads, earth lead first.
  2. Remove front console. See this section.
  3. Remove passenger’s air bag. See RESTRAINT SYSTEMS, Repairs.
Fascia panel – Remove passenger’s air bag. See RESTRAINT SYSTEMS, Repairs.
  1. Remove drivers pocket from fascia lower cover.
  2. Remove 3 screws securing lower cover, remove cover.
Fascia panel – Remove 3 screws securing lower cover, remove cover.
  1. Remove 5 screws securing ash tray to fascia.
  2. Disconnect cigar lighter multiplug and remove ash tray.
Fascia panel – Disconnect cigar lighter multiplug and remove ash tray.
  1. Disconnect heater control cables at heater.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.