Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - D Series07 Engine - L Series08 Engine - T Series09 Emission control10 Engine management system - MEMS11 Engine management system - PGMFi12 Engine management system - EDC13 Fuel delivery system14 Cooling system15 Cooling system - L Series16 Manifold & exhaust systems17 Clutch18 Manual gearbox - R6519 Manual gearbox - PG120 Automatic gearbox21 Drive shafts22 Steering23 Suspension24 Brakes25 Restraint systems26 Body27 Heating & ventilation28 Air conditioning29 Wipers & washers30 Electrical31 Instruments
Rover 400 Workshop Manual (1995-2000)26 · Body
26 · Body & interior

Headlining with sun roof

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Interior trim components › Headlining with sun roof
BodyHeadlining with sun roof · page 1 of 2

HEADLINING WITH SUN ROOF

Service repair no - 76.64.15

Remove

  1. Remove both ’A’ post finishers. See this section.
  2. Remove both ’B’ post finishers upper. See this section.
  3. Remove both ’D’/’E’ finishers. See this section.
  4. Remove roof lamp. See ELECTRICAL, Repairs.
Headlining with sun roof – Remove roof lamp. See ELECTRICAL, Repairs.
  1. Release sun visor from clip and remove 2 screws securing each sun visor.
  2. Remove sun visors.
  3. Remove screws and remove each sun visor clip.
Headlining with sun roof – Remove screws and remove each sun visor clip.
  1. Remove 2 covers and 2 screws securing each grab handle.
  2. Remove 3 grab handles.
Headlining with sun roof – Remove 3 grab handles.
  1. Up to 97.5 MY: Remove head rest from each front seat. 97.5 MY on: Remove both front and rear seat head rests.
Headlining with sun roof – Up to 97.5 MY: Remove head rest from each front seat. 97.5 MY on: Remove both front and re
  1. Release alarm sensor from headlining and disconnect multiplug.
Headlining with sun roof – Release alarm sensor from headlining and disconnect multiplug.
  1. Release sealing rubbers from the top of each door aperture.
  2. Remove rear finisher from headlining.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.