Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - D Series07 Engine - L Series08 Engine - T Series09 Emission control10 Engine management system - MEMS11 Engine management system - PGMFi12 Engine management system - EDC13 Fuel delivery system14 Cooling system15 Cooling system - L Series16 Manifold & exhaust systems17 Clutch18 Manual gearbox - R6519 Manual gearbox - PG120 Automatic gearbox21 Drive shafts22 Steering23 Suspension24 Brakes25 Restraint systems26 Body27 Heating & ventilation28 Air conditioning29 Wipers & washers30 Electrical31 Instruments
Rover 400 Workshop Manual (1995-2000)13 · Fuel delivery system
13 · Engine

Inertia fuel shut-off switch (page 3 of 4)

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Repairs
Fuel delivery systemInertia fuel shut-off switch · page 3 of 4
Diagram
  1. Loosen 2 fuel tank strap locknuts and remove 2 tank strap nuts.
  2. Release fuel tank straps from vehicle body.
  3. Using assistance, release fuel tank from body and lower.
  4. Remove fuel tank from beneath vehicle. Do not carry out further dismantling if component is removed for access only.
Remove fuel tank from beneath vehicle. Do not carry out further dismantling if component i
  1. Release clip securing breather hose to fuel tank and remove breather hose.
  2. Loosen clip securing filler neck hose to fuel tank and remove filler neck hose.
  3. Remove nut securing hose bracket to fuel tank.
  4. Release hose bracket from fuel tank.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.