Fault finding
- Make
- Rover
- Model
- 600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
- Section
- Operation › Fault finding
Brakes – ABS BY4Fault finding
FAULT FINDING
| MAIN CODE | SUB CODE | SYMPTOM/DIAGNOSIS | PROBABLE CAUSE |
|---|---|---|---|
| 7 | 1 | Solenoid: Right – front |
Fail – safe relay stuck OFF.
|
| 7 | 2 | Left – front | |
| 7 | 4 | Rear Each solenoid valve is momentarily activated at initial diagnosis and when the engine is started. ABS indicator light illuminates when battery voltage is detected at solenoid terminal. |
|
| ABS indicator light is illuminated when 0V is detected at solenoid terminal and solenoid OFF signal is detected during regular diagnosis. |
Intermittent interruption in solenoid valve drive circuit. Intermittent interruption in solenoid valve earth circuit. Intermittent interruption in fail – safe relay circuit. |
||
| 8 | 1 | ABS function ABS indicator light illuminates when ABS functions continuously. |
Wheel sensor signal disappears at speeds below 6 mph (10 km/h).
Intermittent interruption in wheel sensor. Rough road driving – (No problem). |
| 8 | 2 | CPU comparison ABS indicator illuminates when a difference between CPU data is detected. |
Faulty ABS control unit. Symptom does not reappear: No problem. |
| 8 | 4 | IC (integrated circuit) ABS indicator illuminates if any integrated circuit abnormalities are detected during regular diagnosis. |
Faulty ABS control unit. Symptom does not reappear: No problem. |
Parts & tools for this job For Rover 600
- TOOLOBD2 scanner with ABSSearch: OBD2 scanner ABS SRS
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.