Fault finding
- Make
- Rover
- Model
- 600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
- Section
- Operation › Fault finding
Brakes – ABS BY4Fault finding
| Number | Wire colour | Terminal name | Description |
|---|---|---|---|
| 19 | Y | P – SW Pressure switch | Detects switch signal Switch turns ON at approx. 22000 kPa, 3100 lb/in² and pump motor is stopped ON: 0V / OFF: 12V |
| 24 | UR | WARN 2 Warning lamp | Drives ABS indicator light Shuts off the indicator light earth circuit inside the ABS control unit to turn off the light when the system is normal. Light ON: 0V / Light OFF: 12V |
| 25 | B | FL – GND Front left solenoid valve earth | Earth for the front left inlet and outlet solenoid valves |
| 26 | B | L – GND Logic earth | Earth for the ABS control unit control circuits |
FAULT FINDING
Parts & tools for this job For Rover 600
- TOOLOBD2 scanner with ABSSearch: OBD2 scanner ABS SRS
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.