Overhaul/Inspection

Overhaul/Inspection

CAUTION: Do not allow brake fluid to contact paint finished surfaces as paint may be damaged. If spilled, remove fluid and clean area with clean warm water.

• Clean all parts in brake fluid and air dry; blow out all passages with compressed air.
• Before reassembling, check that all parts are free of dust and other foreign particles.
• Replace piston cups A and B.
• Check piston for wear and damage.
• Check slave cylinder walls for scoring and wear.
• On reassembly, install spring with small end towards piston.
• Make sure no dirt or other foreign matter is allowed to contaminate the brake fluid.
• Do not mix different brands of brake fluid as they may not be compatible.
• Do not re – use the drained fluid. Use only clean DOT 3 or 4 brake fluid.