Removal (page 2 of 5)

Install new ‘O’ rings.
Apply compressor oil to the ‘O’-ring joints.

1. Install the expansion valve to the A/C unit body.
2. Install the A/C pipes to the expansion valve.
3. Install the A/C pipes clamp.
4. Install sealant around the evaporator pipes.
5. Install the in-vehicle temperature pipe to the A/C unit clips.
6. Carry out A/C system actuator check and functional check to ensure correct operation (Refer to ‘A/C System Testing’, page 12-3-9)
7. Connect the vehicle battery. Start the engine. Allow the engine cooling system to rise to normal running temperature.
8. Carry out A/C system actuator check and functional check to ensure correct operation (Refer to ‘A/C System Testing’, page 12-3-9).