Sos button not working
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Radio and accessories etc.. › Sos button not working
‹ Prev When reverse gear is engaged the anti-glare function is not excludedNext › Infomobility button not working
Fault diagnosisSos button not working
SOS BUTTON NOT WORKING
| Test results | ||||
| 1 | SOS BUTTON OPERATION CHECK | All OK | Problems encountered | Operation |
|---|---|---|---|---|
Check that the SOS button is working properly, carrying out See Test | Move on to Step 2 | Control panel button contact defective | Replace the control panel | |
| 2 | WIRING CHECK | All OK | Problems encountered | Operation |
Check the continuity of the wiring between the control panel and convergence node | End of diagnosis | 1. Wiring broken or short circuited 2. Convergence node faulty | 1. Restore the correct wiring 2. Replace the convergence node | |
‹ Prev When reverse gear is engaged the anti-glare function is not excludedNext › Infomobility button not working
Parts & tools for this job For 2007 Fiat 500
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat 500
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.