ENGINE COOLING RADIATOR SUPPORTING CROSSMEMBER - R.R.

Operation 1088B32 · ENGINE COOLING RADIATOR

1.4 16v, 1.9 JTD 8v, 1.9 JTD 16v

Removing

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

- Secure the radiator assembly to the headlamp crosmember.

1. Unscrew the bolts securing the bumper to the radiator supporting crossmember.

1. Undo the bolts (1a) fixing the radiator supporting crossmember (1b) to the front end and remove it.

1. Remove the flexible mountings supporting the radiator from the radiator supporting crossmember.

Refitting

- Fit the flexible mountings supporting the radiator to the radiator supporting crossmember.

- Place the radiator supporting crossmember in position and secure it to the front end using the bolts taking care to centre the radiator fixing pins.

- Tighten the bolts securing the bumper to the radiator supporting crossmember.

- Release the radiator assembly from the headlamp crosmember.

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

1.4 16v TJet

Removing

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

1. Unscrew the bolts securing the bumper to the radiator supporting crossmember.

2. Undo the bolts securing the heat exchanger air inlet/outlet pipes to the radiator supporting crossmember.

3. Undo bolts (3a) securing the radiator supporting crossmember (3b) to the front end and remove it.

1. Remove the flexible mountings supporting the radiator from the radiator supporting crossmember.

Refitting

- Fit the flexible mountings supporting the radiator to the radiator supporting crossmember.

- Place the radiator supporting crossmember in position and secure it to the front end using the bolts and taking care to centre the radiator retaining pins.

- Tighten the bolts securing the heat exchanger air inlet/outlet pipes to the radiator supporting crossmember.

- Tighten the bolts securing the bumper to the radiator supporting crossmember.

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.