WATER PUMP - R + R WITH TIMING BELT(S) REMOVED

Operation 1088C14 · WATER PUMP AND THERMOSTAT

1.4 16v, 1.4 16v TJet

Removing

Op. 0010T20 ENGINE COOLANT - CHANGE

1. Undo the bolts fixing the water pump to the crankcase.

2. Remove the water pump from the crankcase.

Refitting

- Clean the residues of sealant from the mating surfaces between the engine block and the water pump.

- Apply a strip of silicone sealant to the contact surfaces between the water pump and the engine block.

- Position the water pump in its housing and secure it tightening the bolts to the recommended torque.

Op. 0010T20 ENGINE COOLANT - CHANGE

1.9 JTD 8v

Removing

Op. 0010T20 ENGINE COOLANT - CHANGE

1. Undo the bolts (1a) and remove the coolant pump (1b) complete with gasket.

Refitting

- Refit the water pump, complete with gasket, in its housing and secure it by tightening the bolts to the recommended torque.

Op. 0010T20 ENGINE COOLANT - CHANGE

1.9 JTD 16v

Removing

Op. 0010T20 ENGINE COOLANT - CHANGE

1. Undo the bolts (1a) and remove the coolant pump (1b) complete with gasket.

Refitting

- Refit the water pump, complete with gasket, in its housing and secure it by tightening the bolts to the recommended torque.

Op. 0010T20 ENGINE COOLANT - CHANGE