Radiator coolant outlet hose - r.r.
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Engine cooling › Radiator coolant outlet hose - r.r.
RADIATOR COOLANT OUTLET HOSE - R.R.
Removing
Op. 0010T20 ENGINE COOLANT - CHANGE
1. Loosen the band and disconnect the lower coolant outlet hose from the radiator, water pump side.
2. Disconnect the rapid connector and remove the lower coolant outlet hose from the radiator.
1. Loosen the band and disconnect the radiator coolant outlet hose (1a) from the rapid connector (1b).
Refitting
- Connect the lower radiator coolant outlet hose to the rapid connector and tighten the band.
- Place the lower radiator coolant outlet hose in position, connect to the radiator using the rapid connector and to the water pump inlet pipe using the band.
Op. 0010T20 ENGINE COOLANT - CHANGE
Removing
- Position the vehicle on a lift.
Op. 1016A10 SOUND-PROOFING COVER - R.R
Op. 0010T20 ENGINE COOLANT - CHANGE
1. Using the rapid connector, disconnect the lower outlet hose from the radiator.
- Lower the vehicle.
1. Loosen the band, disconnect the lower coolant outlet hose from the radiator, water pump rigid coolant return pipe side and remove it.
1. Loosen the band and disconnect the radiator coolant outlet hose (1a) from the rapid connector (1b).
Refitting
- Connect the lower radiator coolant outlet hose to the rapid connector and tighten the band.
- Place the lower coolant outlet hose from the radiator back in its housing, connect it to the water pump rigid coolant inlet pipe and tighten the band.
- Raise the vehicle.
- Connect the lower hose to the radiator and close the rapid connector.
Op. 1016A10 SOUND-PROOFING COVER - R.R
Op. 0010T20 ENGINE COOLANT - CHANGE
- Remove the vehicle from the lift.
Removing
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
Op. 0010T20 ENGINE COOLANT - CHANGE
1. Loosen the band and disconnect the lower coolant outlet hose from the radiator, water pump side.
1. Disconnect the rapid connector and remove the lower coolant outlet hose from the radiator.
1. Loosen the band and disconnect the radiator coolant outlet hose (1a) from the rapid connector (1b).
Refitting
- Connect the lower radiator coolant outlet hose to the rapid connector and tighten the band.
- Place the lower radiator coolant outlet hose in position, connect to the radiator using the rapid connector and to the water pump inlet pipe using the band.
Parts & tools for this job For 2007 Fiat Bravo
- FLUIDCoolantSearch: Fiat coolant antifreeze
- PARTThermostatSearch: Fiat Bravo 2007 thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.