PIPE FROM ENGINE COOLANT RESERVOIR TO TURBOCHARGER - R.R.

Operation 1088D48 · COOLANT PIPES AND HOSES

1.4 16v TJet

Removing

- Position the vehicle on a lift.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Undo the connector for the pipe from engine coolant reservoir to the turbocharger, turbocharger side.

2. Undo the bolt for the mounting bracket for the pipe from the engine coolant reservoir to the turbocharger.

3. Open the retaining clip (3a), loosen the bands (3b) and remove the pipe from the engine coolant reservoir to the turbocharger (3b).

Refitting

- Place the pipe from the engine coolant reservoir to the turbocharger in position, tighten the bands and close the retaining clip.

- Tighten the bolt for the mounting bracket for the pipe from the engine coolant reservoir to the turbocharger.

- Tighten the connector, with new gaskets, for the pipe from the engine coolant reservoir to the turbocharger, turbocharger side to the recommended torque.

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

- Remove the vehicle from the lift.