Cam angle sensor - r.r.
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Petrol injection system › Cam angle sensor - r.r.
‹ Prev Engine coolant temperature sensor - r + rNext › Intake air pressure/temperature sensor - r.r.
EngineCam angle sensor - r.r.
CAM ANGLE SENSOR - R.R.
Removing
Op. 1048A10 AIR FILTER ASSEMBLY - R.R.
1. Disconnect electrical connection (1a), unscrew bolt (1b) and remove cam angle sensor (1b).
| Description | Connector | |
|---|---|---|
| 1a | Timing sensor | See K047 TIMING SENSOR |
Refitting
- Position the cam angle sensor in its housing and secure it using the bolt.
- Connect the electrical connection for the cam angle sensor.
Op. 1048A10 AIR FILTER ASSEMBLY - R.R.
Removing
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Detach the electrical connection for the cam angle sensor.
| Description | Connector | |
|---|---|---|
| 1 | Timing sensor | See K047 TIMING SENSOR |
2. Undo the bolt and remove the cam angle sensor.
Refitting
- Position the cam angle sensor in its housing and tighten the bolt.
- Connect the electrical connection for the cam angle sensor.
‹ Prev Engine coolant temperature sensor - r + rNext › Intake air pressure/temperature sensor - r.r.
Parts & tools for this job For 2007 Fiat Bravo
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.