Intake air pressure/temperature sensor - r.r.
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Petrol injection system › Intake air pressure/temperature sensor - r.r.
INTAKE AIR PRESSURE/TEMPERATURE SENSOR - R.R.
Removing
Op. 1048A10 AIR FILTER ASSEMBLY - R.R.
1. Disconnect electrical connection (1a), unscrew the bolt and remove intake air pressure/temperature sensor (1b).
| Description | Connector | |
|---|---|---|
| 1a | Air pressure - temperature sensor | See K044 AIR TEMPERATURE/PRESSURE SENSOR |
Refitting
- Place the intake air temperature/pressure sensor back in its housing and secure it using the bolt.
- Connect the electrical connection for the intake air temperature/pressure sensor.
Op. 1048A10 AIR FILTER ASSEMBLY - R.R.
Removing
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Disconnect the electrical connection for the intake air pressure/temperature sensor.
| Description | Connector | |
|---|---|---|
| 1 | Integrated air temperature sensor | See K043 INTEGRATED AIR TEMPERATURE SENSOR |
2. Undo the bolt and remove the intake air temperature/pressure sensor.
Refitting
- Place the intake air temperature/pressure sensor back in its housing and tighten the bolt.
- Connect the electrical connection for the intake air temperature/pressure sensor.
Parts & tools for this job For 2007 Fiat Bravo
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.