Displayed parameters
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Fuel system (1581 16v) › Displayed parameters
10 EngineDisplayed parameters
DISPLAYED PARAMETERS
Engine rpm
Injection time
Absolute pressure to inlet manifold
Air temperature
Coolant temperature
Throttle opening angle
Battery voltage
Voltage LAMBDA probe status
Engine idle speed actuator
Self-adaptability
Vehicle speed
Mixture level
Petrol vapour solenoid
Fiat CODE
List of errors
| RPM sensor | A.C-D.C. |
| Throttle potentiometer | A.C-D.C. |
| Absolute pressure sensor | A.C-D.C. |
| Air temperature sensor | A.C-D.C. |
| Coolant temperature sensor | A.C-D.C. |
| Battery | Power supply > 15.5V Power supply < 5V |
| Lambda probe | Status not plausible (probe disconnected or faulty) |
| Injector | D.C |
| Ignition coils | A.C-D.C. |
| Idle speed actuator | A.C-D.C. |
| Fuel vapour solenoid | No. of subsequent steps |
| Actuator relays | A.C-D.C. |
| Control unit | Microprocessor or ECU memory faults are indicated. |
| Self-adaptive parameters | Indication displayed when ECU self-adaptive limits reached. This indication means that engine conditions are much too far from specified levels and mechanical causes should also be investigated. |
| Timing sensor | A.C-D.C. |
| Speed sensor | Signal absent |
| Signal framework | Tooth count incorrect - Space between two missing teeth not recognised |
| Mixture level | Greater than maximum threshold Lower than minimum threshold |
| Fiat CODE | Code not recognised or not received |
Parts & tools for this job For 1995 Fiat Bravo
- PARTFuel filterSearch: Fiat Bravo 1995 fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.