Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing - refitting lambda probe

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel system (1581 16v) › Removing - refitting lambda probe
10 EngineRemoving - refitting lambda probe

REMOVING - REFITTING LAMBDA PROBE

Diagram showing the electrical connection located against the rear wall of the engine bay, protected by a cover.
  • Position vehicle on lift
  • Disconnect battery negative lead
  • Disconnect electrical connection located against the rear wall of the engine bay and protected by a cover.
Diagram showing the lambda probe removed from its seat on the exhaust pipe.
  • Remove the lambda probe from its seat on the exhaust pipe.

When refitting, spread the threaded part with ANTISEIZE MATERIA-BORON NITRIDE N.G.K. grease from SPARK PLUG CO-LTD.

Tightening torque 3.5 - 4.5 daNm

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.