Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting electric fuel pump

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel system (1581 16v) › Removing-refitting electric fuel pump
10 EngineRemoving-refitting electric fuel pump

Removing-refitting electric fuel pump

Diagram showing the load compartment floor and dust cover area with tool reference 1878077000
The pump is located in the tank: proceed as follows to remove: Undo retaining buttons indicated using tool 1878077000. Lift load compartment mat. Remove dust cover.
Diagram showing the fuel pump assembly being removed from the tank using tool 1860893000
Disconnect electrical connections from pump and from fuel level sending unit. Disconnect fuel lines (inlet, outlet and breather). Unscrew lock-ring retaining pump to tank using tool 1860893000 and a box wrench. Remove fuel pump assembly.

When refitting, electrical connections and fuel lines cannot be fitted the wrong way round because the respective terminals are of different diameter.

Components of fuel pump assembly

Exploded diagram of the fuel pump assembly showing four numbered components
  1. Fuel level gauge
  2. Retaining plate
  3. Electric pump
  4. Reservoir with mesh prefilter

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.