Idling c.o. level - check with special equipment
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Emission control system › Idling c.o. level - check with special equipment
IDLING C.O. LEVEL - CHECK WITH SPECIAL EQUIPMENT
Carry out the measurement with all the emission control devices acitive and at the specified idle speed.
- Insert the probe of an exhaust gas analyser into the end of the exhaust pipe by not less than 30 cm.
If the shape of the exhaust tailpipe will not allow the probe to be fully introduced, add an extension that ensures a seal in the joint area.
- Wait for the exhaust gas tester indices to stabilise.
- With the engine idling, check that the CO2 level is within specified limits.
| Measurement | Value | Validity |
|---|---|---|
| CO2 emisssions (in accordance with directive 1999/100/CE) [g/km] | 204 | 2.2 |
| Measurement | Value | Validity |
|---|---|---|
| CO2 emisssions (in accordance with directive 1999/100/CE) [g/km] | 229 | 2.2 CAE |
Carry out the measurement with all the emission control devices active and at the specified idle speed.
- Insert the probe of an exhaust gas analyser into the end of the exhaust pipe for at least 30 cm.
If the shape of the exhaust tailpipe will not allow the probe to be fully introduced, add an extension that ensures a seal in the joint area.
- Wait for the exhaust gas tester indices to stabilise.
- With the engine idling, check that the CO2 level is within specified limits.
| Measurement | Value | Validity |
|---|---|---|
| CO2 emisssions (in accordance with directive 1999/100/CE) [g/km] | 178 | 1.8 |
Parts & tools for this job For 2005 Fiat Croma
- PARTExhaust gasketSearch: Fiat Croma 2005 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.