INTERMEDIATE FUEL VAPOUR PIPE R R

Operation 1080E50 · EVAPORATION CONTROL SYSTEM

1.8, 2.2

Removing

- Position the vehicle on a lift.

1. Working underneath the vehicle, undo the bolts (1a) and remove the front pipe protection (1b).

1. Undo the bolts and remove the rear pipe protection.

2. Undo the bolts (2a) and remove the bracket (2b).

1. Undo the bolts (1a), loosen the bolt (1b) and turn the underbody reinforcement (1c) sideways.

1. Disconnect the rapid connector for the intermediate fuel vapour pipe, front fuel vapour pipe side.

1. Disconnect the rapid connector for the intermediate fuel vapour pipe, rear fuel vapour pipe side.

1. Remove the intermediate fuel vapour pipe after having released it from the underbody fastenings.

Refitting

- Place the intermediate fuel vapour pipe in its housing and secure it to the underbody using the clips.

- Connect the rapid connector for the intermediate fuel vapour pipe, rear fuel vapour pipe side.

- Connect the rapid connector for the intermediate fuel vapour pipe, front fuel vapour pipe side.

1. Place the underbody reinforcement (1a) in its housing and secure it tightening the new bolts (1b) and (1c) to the recommended torque.

- Fit the bracket in its housing and secure it using the bolts.

- Place the rear pipe guard in its housing and secure it using the bolts.

- Place the front pipe guard in its housing and secure it using the bolts.

- Remove the vehicle from the lift.