ENGINE OIL VAPOUR SEPARATOR - R + R

Operation 1080D34 · CRANKCASE VAPOUR/GAS RECIRCULATION SYSTEM

1.9 JTD 16v, 2.4 JTD 20v

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 1060G70 VACUUM RESEVOIR - R.R

1. Loosen the band and disconnect the engine oil vapour recovery pipe, engine oil vapour separator side.

2. Loosen the band and disconnect the condensed engine oil recovery pipe, engine oil vapour separator side.

3. Undo the nuts (3a) and remove the bracket (3b) complete with engine oil vapour separator (3c).

Refitting

- Place the bracket complete with engine oil vapour separator in its housing and secure it nuts.

- Connect the condensed oil recovery pipe, engine oil vapour separator side, and tighten the band.

- Connect the engine oil vapour recovery pipe, engine oil vapour separator side and tighten the band.

Op. 1060G70 VACUUM RESEVOIR - R.R

Op. 1016A10 SOUND-PROOFING COVER - R.R