COOLANT PIPE FROM CYLINDER HEAD R R

Operation 1088D43 · COOLANT PIPES AND HOSES

2.2

Removing

1. Remove the sound insulation cover fastened to the engine by three pins.

1. Loosen the band and disconnect the coolant pipe from the cylinder head, cylinder head side.

1. Undo the nut (1a), loosen the band and remove the coolant pipe from the cylinder head (1b).

Refitting

- Place the coolant pipe from the cylinder head in its housing, then tighten the bands and the nut.

- Place the sound insulation cover back in its housing and secure it to the engine using the three pins.