Water pump - r + r with timing belt(s) removed
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Engine cooling › Water pump - r + r with timing belt(s) removed
EngineWater pump - r + r with timing belt(s) removed
WATER PUMP - R + R WITH TIMING BELT(S) REMOVED
Removing
1. Undo the bolts (1a) and remove the coolant pump (1b) complete with gasket.
Refitting
- Refit the water pump, complete with gasket, in its housing and secure it tightening the bolts to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Water pump | Bolt | M8 | (cylinder head side) 2.3 - 2.8 | 1.9 JTD 8v 1.9 JTD 16v |
- On this version it is not possible to remove/refit the water pump on the car.
To perform this operation, remove/refit the power unit
Op. 1004B14 POWER UNIT WITH AUTOMATIC TRANSMISSION R + R
and then work at the bench, customising the engine service procedures for this operation.
Parts & tools for this job For 2005 Fiat Croma
- PARTTiming belt kitSearch: Fiat Croma 2005 timing belt kit
- TOOLEngine timing tool setSearch: Fiat engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.