Water pump pulley - r.r.
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Engine cooling › Water pump pulley - r.r.
EngineWater pump pulley - r.r.
WATER PUMP PULLEY - R.R.
Removing
Op. 1048A10 AIR FILTER ASSEMBLY - R.R.
1. Loosen the bolts (1a) fixing the water pump pulley (1b).
Op. 1092G10 SINGLE ENGINE BELT - R.R
- Undo the bolts loosened previously and remove the water pump pulley.
Refitting
- Position the water pump pulley in its housing and tighten the bolts to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Water pump pulley | Bolt | 2.0 | 1.8 |
Parts & tools for this job For 2005 Fiat Croma
- FLUIDCoolantSearch: Fiat coolant antifreeze
- PARTThermostatSearch: Fiat Croma 2005 thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.