LOWER RADIATOR COOLANT OUTLET HOSE - R.R.

Operation 1088D10 · COOLANT PIPES AND HOSES

2.2

Removing

- Position the vehicle on a lift.

- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

1. Remove the soundproof cover secured to the engine by three pins.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

1. Unscrew the coolant drain plug from the radiator.

Collect the coolant in a suitable container.

1. Working from beneath the car, loosen the collar securing the lower coolant outlet sleeve from the radiator, radiator end.

1. Loosen the band and disconnect the engine oil vapour recovery pipe from the cylinder head cover.

2. Loosen the bands and remove the air delivery sleeve from the air flow meter to the throttle body.

3. Loosen the remaining band and disconnect the radiator lower coolant outlet hose.

Refitting

- Refit the lower coolant outlet sleeve from the radiator and secure with the collars.

- Replace the air delivery sleeve from the air flow meter to the throttle valve in its housing, connect it and tighten the bands.

- Connect the engine oil vapour recovery pipe to the cylinder head cover and secure it using the band.

- Tighten the coolant drain plug to the radiator.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

- Refit the soundproofing cover in its seat and secure to the engine with the three pins.

- Connect the negative battery terminal.

Op. 0010T20 ENGINE COOLANT - CHANGE

- Remove the vehicle from the lift.

1.9 JTD 8v, 1.9 JTD 16v, 2.4 JTD 20v

Removing

- Position the vehicle on a lift.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1048B17 HEAT EXCHANGER AIR INLET HOSE - R.R.

1. Undo the radiator coolant drain plug.

Collect the coolant in a suitable container.

2. Loosen the band and disconnect the lower coolant outlet hose from the radiator, radiator side.

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 1048B19 TURBOCHARGER AIR OUTLET HOSE -R.R.

Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R

Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.

1. Loosen the band and disconnect the lower coolant inlet hose from the radiator, water pump rigid coolant inlet pipe side and remove it.

Refitting

- Place the lower coolant outlet hose from the radiator back in its housing, connect it to the water pump rigid coolant inlet pipe and tighten the band.

Op. 1048A50 TURBOCHARGER AIR INTAKE PIPE - R.R.

Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R

Op. 1048B19 TURBOCHARGER AIR OUTLET HOSE -R.R.

Op. 1016A10 SOUND-PROOFING COVER - R.R

- Connect the radiator lower coolant outlet hose, radiator side, and tighten the band.

- Tighten the coolant drain plug to the radiator.

Op. 1048B17 HEAT EXCHANGER AIR INLET HOSE - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 0010T20 ENGINE COOLANT - CHANGE

- Remove the vehicle from the lift.

1.8

Removing

Op. 0010T20 ENGINE COOLANT - CHANGE

1. Loosen the band and disconnect the engine cooling system supply pipe, reservoir side.

1. Loosen the band and disconnect the coolant outlet hose from the lower radiator connector.

2. Loosen the band and disconnect the coolant outlet hose from the radiator, pump side and remove it complete with the system supply pipe.

Refitting

- Place the radiator coolant outlet hose in position, pump side, complete with system supply pipe and connect it using the band.

- Connect the coolant outlet hose to the lower radiator connector and tighten the band.

- Connect the engine cooling system supply pipe, reservoir side and tighten the band.

Op. 0010T20 ENGINE COOLANT - CHANGE