COOLANT SUPPLY PIPE TO THROTTLE BODY - R.R.

Operation 1088D59 · COOLANT PIPES AND HOSES

1.8

Removing

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R

Op. 1048A34 SLEEVE(S) FROM FLOW METER TO AIR SUPPLY CAPACITY CASE - R + R

1. Disconnect the rapid connector for the throttle body coolant supply pipe, thermostat side.

1. Loosen the band and disconnect the throttle body coolant supply pipe, throttle body side.

- Remove the throttle body coolant supply pipe from the retaining clips on the modular chamber.

Refitting

- Place the throttle body coolant supply pipe in position and secure it to the modular chamber using the retaining clips.

- Connect the coolant supply pipe to the throttle body, throttle body side and tighten the band.

- Connect the rapid connector for the throttle body coolant supply pipe, thermostat side.

Op. 1048A34 SLEEVE(S) FROM FLOW METER TO AIR SUPPLY CAPACITY CASE - R + R

Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R

Op. 0010T20 ENGINE COOLANT - CHANGE

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.