Refitting
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Air conditioner unit and components › Refitting
50 Auxiliary unitsRefitting
(Cont. Op. 5040D64)
- Take out the wiring and remove the switch control group.
- Unscrew screws (1a) and remove the switch holder bracket (1b) from the template (1c).
- Remove the air conditioner control switch from the switch holder bracket.
Refitting
- Assemble the air conditioner control switch on the switch holder bracket.
- Assemble the switch holder bracket on the template and fasten with the screws.
- Refit the switch control group and make the electrical connections
| Name | Connector | |
|---|---|---|
| - | switch control group | H90A |
| - | switch control group | H90A |
| - | switch control group | H90C |
- Fit the wiring and assemble the switch control group.
Insert the switch control group from above to hook the securing fins.
- Tighten the switch control group fastening screws.
- Insert the air fan control knob.
- Connect the negative (-) battery terminal
| Name | Connector | |
|---|---|---|
| - | Battery | A1 |
- Close the engine compartment.
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.