5580c18 - airbag module

5580C18 - AIRBAG MODULE

(ELECTRONIC)

Interventions on airbag system components must be performed by specifically trained staff, STRICTLY attaining to the following safety precautions. For removal and replacement, use polyethylene gloves and goggles.

Always turn the ignition key to STOP and remove it, disconnect and insulated carefully the positive and negative battery cables when removing and refitting the airbag unit. Wait 10 minutes before proceeding. suc

Never use naked flames near the airbag device and system components.

All single system components cannot be repaired but must be replaced.

Attain to all the prescribed safety rules (see 5580 C - PRECAUTIONS)

Removal

1. Lift the tabs covering the airbag unit fastening screws.

1. Remove the unit from the steering wheel.

1. Lift the airbag module (1a) lightly. Disconnect the connection (1b) with care pulling the wire out from the connector.

(Segue)