Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)10 · 55 Electrical equipment
10 · Electrical

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Special accessories › Refitting
55 Electrical equipmentRefitting

(Op. 5580E28 continued)

Refitting

  • Check that the switch is not damaged.
  • Fit the switch in its seat.
  • Connect the electrical connections.
  • Check system operation with an Examiner or other diagnostic tool.

5580E30 - THEFT PREVENTION REMOTE CONTROL - R.R.

Removal

  • Perform Op. 7040E10 - FRONT CEILING LIGHT - R.R.
  1. Remove the screws.
  2. Shift the volumetric sensor support.
Diagram showing the removal of screws (1) and shifting of the volumetric sensor support (2) from the ceiling light assembly.
  1. Disconnect the electric connection and take the volumetric sensor support.
Name Connector
1 Alarm remote control receiver M35
Diagram showing the alarm remote control receiver unit with its cover, electric connections, and receiver aerial (4a) retained by three retainers (4b).
  1. Remove the cover screw at the bench.
  2. Remove the cover.
  3. Disconnect the volumetric sensor electric connections.
  4. Remove the receiver aerial (4a) from its three retainers (4b).

(Cont..)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.