Refitting

5. Remove the remote control receiver, paying attention not to damage the extension to the LED (5a)
6. If required, take the programming control button and spring.

Refitting

• Check that the receiver is not damaged.
• If removed, refit the programming control button and spring in its seat.
• Reposition the remote control receiver in its seat, paying attention not to damage the extension and LED.
• Reposition the receiving aerial in the retainers.
• Connect volumetric sensor electric connections.
• Reposition the cover and fasten the screws.
• Connect the volumetric sensor support electric connection.
• Reposition the volumetric sensor support and fasten screws.
• Complete with Op. 7040E10 - FRONT CEILING LIGHT - R.R.
• Check system operation with an Examiner or other diagnostic tool.

5580E46 - THEFT PREVENTION ECU/ALARM - R.R.

Removal

• Open bonnet and secure it.

1. Disconnect the injection ECU electric connection.

2. Remove the two side nuts from the theft prevention ECU/siren.

(Cont..)