Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)10 · 55 Electrical equipment
10 · Electrical

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Special accessories › Refitting
55 Electrical equipmentRefitting
  1. Disconnect the warning light electric connection.
NameConnector
Alarm LEDE40
  1. Remove the nut.
  2. Remove the warning light.
  3. If required, lift the warning light support.
Diagram showing the removal of the warning light and its support from under the dashboard, with callout numbers 1 through 4 indicating connectors and fasteners.

Refitting

  • Check that the warning light is not damaged.
  • If removed, fit the warning light support.
  • Reposition the warning light and screw the nut.
  • Connect the warning light electric connection.
  • Reposition the lower panel and fasten the screws.
  • Check system operation with an Examiner or other diagnostic tool.

5580E22 - THEFT PREVENTION VOLUMETRIC SENSORS - R.R. FOLLOWING CHECKS TO ELECTRIC CIRCUIT

Removal

  • Perform Op. 7040E10 FRONT CEILING LIGHT - R.R.
  1. Remove the screws.
  2. Shift the volumetric sensor support.
Diagram showing the volumetric sensor support mounted inside the vehicle interior, with callout number 1 pointing to the unit and callout number 2 pointing to a screw.
  1. Disconnect the electric connections. Take the volumetric sensor support.
NameConnector
1 Alarm remote control receiverM35
Diagram showing the alarm remote control receiver unit located in the vehicle interior, with callout number 1 pointing to the connector.

(Cont..)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.